If you are considering RV solar installation, there are many solar energy guides available to help you get started. These guides can save you time and money as you figure out your needs and then find the best way to incorporate them into your RV setup. You can do this yourself, or get some help from an expert. Here are some RV solar installation tips to help get you started.
First, calculate your energy requirements. This calculation will guide you in choosing the right solar module size for your RV roof. The key here is to find a size that does not exceed your rv roof area. If you require large panels, you must cut down on your energy requirements. This is where a professionally installed and monitored battery monitor will come in handy. If you don’t have one, then make sure you get a battery monitor that will alert you when your battery is low and give you the option of recharging it.
Next, measure where you want the mounting brackets to be placed. Then purchase the mounts. Some people choose to install the panels on their own using special tools. In this case, you will need some basic tools like a screwdriver, wire cutters and a drill. It is highly recommended that you hire an electrician to perform the installation so that there are no chances of injury to you or the rig.
Next, read up on whole house inverter systems. These systems use your existing electrical system and combine it with a high quality solar panel system. The result is more electricity at a lower cost to you. Read up on whole house inverter systems so you understand how they work and what you will need to do to install them.
Next, contact your local electrician and ask him to hook up your rv solar panel installation. Ask him for the details of the whole electrician-solar system installation. Make sure you have all the relevant information before proceeding.
Once the electrician has completed the whole RV solar panel installation, the roof should be ready. It is important to place the solar panels on the roof so that maximum sunlight can be given to the batteries. Now you are ready to enjoy your new RV! You may want to install a set of rv solar lights as well. These lights will provide you with additional lighting at night.
You should now install the RV solar installation into your rv. The first thing that you will need to do is check the voltage power input into your battery. You must ensure that the amp requirement is met by your battery. Then attach the solar controller to the battery. You must set the amp rating to the RV imp rating of the whole house inverter.
After setting the amp requirement, you should run a series of tests. This includes checking the energy level of the battery bank. It is important to ensure that your battery bank does not run dry. If your battery bank runs dry, the energy level will automatically drop down. This will reduce the energy efficiency of your whole house inverter.
Next, attach the RV solar panel to the RV solar power input. To do this, you must attach the wiring to the RV’s wiring lug. Be sure to secure these wiring lug insulators. You should then connect the solar panel to the RV’s main electric jacks. The next step is to run the whole wiring through the back of your rig. The last step is to run the power cord from the back of the solar panels to the battery bank.
Next, you should remove the negative wires from your solar panel. These are called the non-reusable wiring. You should then insert the new positive-wired solar panel. You will notice the gaps on your rv as the new positive-wired solar panel is inserted.
You can now attach the positive-wired solar panels to the negative wires of your electric grid. Finally, you can connect the batteries to your generator. You will notice that the solar array is connected to your RV battery. To complete the installation, you should always run one bulb from your new battery. This bulb will supply you enough energy to run your refrigerator and other appliances.