If you have thought of installing solar panels in your home, but don’t have much money to spend or if your solar system seems complicated and expensive, you can still create an emergency solar generator. This way you can avoid expensive installation costs and save on your electric bill. Here are some solar systems tips that you can follow to build an emergency solar generator for home use.
Solar systems are very easy to set up and use. The most basic ones require only a battery and an inverter. Solar generators consume little fuel and are also very clean. In fact, it is getting necessary for many homes to install a back-up power supply. After all, you never know when there will be a solar power outage. Emergency solar generators for emergency use will help you cut power when there is a blackout.
To ensure the reliability of your solar generator, make sure you place it in a good location. It should be in an open area so that any component overheats does not affect the functioning of the entire set. The inverter must also be placed in a secure area. If you live in a hurricane-zone, look for generators with a higher peak power capacity.
An important solar generator tip is to have batteries ready to use during a blackout. Most portable generators take a single-hour charge from a spare battery. Batteries will allow you to keep your other appliances going during blackouts. In addition, batteries can also be used to charge all your appliances that will run while you are out without power.
Another thing you need to check is the peak power capacity of your batteries. If you buy a battery that has a high maximum capacity but a low maximum voltage, you will find that your solar system does not work as well as it should. The battery will only draw power at a maximum rate when the sun’s rays are the most powerful.
The best solar generators have high outputs. They are designed to generate more energy than what they actually consume. They also have outputs that match the energy output of your solar power system. This means you will be able to utilize the power coming from the sun at its best, which in turn guarantees long lasting operation.
You also need to determine the starting wattage and current value. The starting wattage tells you how many watts will be generated by your solar generator. On the other hand, the current value tells you how many watts are currently being used by your portable generator power station. The current value is also called the rating current.
A four-hour timer is also very helpful in determining your emergency system’s power consumption and current output. It gives you a chance to set a limit on how much power your appliances or electronic systems will require. Finally, you should use a system that matches the requirements of all your appliances and electronics so you can be sure that none of them will be struggling with a system that is too small or too large for their needs.
Next, you should consider the peak power capacity or maximum power of your solar power generators. This is usually indicated on the box or tag of your generator. The peak power capacity is usually measured in watts per minute.
You should also pay close attention to the type of power supply that your solar panels will use. Your solar-powered generator will only work with solar panels that have the same wattage rating as your solar panel system. There are several types of power supplies you can use. The two most common types are direct current (DC) and alternating current (AC).
It is important to note that DC is not the most energy efficient source of power. This is because it utilizes electrical energy and converts it to mechanical energy. AC, on the other hand, uses magnetic energy and convert it into mechanical energy. As such, DC solar generator is more cost-efficient as it will use less energy than AC solar panels. You may find that you will save up to 70% of the energy costs when using a solar generator that uses DC instead of AC.