A Solar Water Heater is basically a device utilized to convert sun energy into heat electricity for water heating. The Solar Water Heating System usually consists of a large solar collector with attached storage tank. The heated water is stored in a big tank that’s insulated and hence it can be easily accessed at all times. During the day, the sun rays fall onto the collector plate and this heat energy is collected by the solar collector plate which in turn heats up the water stored inside the tank.
The setup of the DIY solar water heater for home is not very complicated. You will not require any professional help during the whole process of installation. As far as possible, try to avoid inclement weather so as to make the installation period easier and faster. In case of cloudy days, be ready for cloudy days since you have to change the storage tank often. During sunny days, the solar energy collected by the collector plate will be utilized to heat the home. If you want, you can also store excess energy generated through the DIY solar energy guides to be utilized during cloudy days.
The best way to generate heat from solar energy is by utilizing the solar power panels. They work on autopilot and won’t even stop working if the weather becomes very cloudy. These solar panels are available in different shapes and sizes. You can purchase them from any home improvement store or hardware outlet. Once you buy one, you won’t have to bother about any kind of installation.
The installation of the DIY solar water heater for home is simple. Before starting the installation, be prepared with all the things you need including tools, wires, fuses and the manual. You can find plenty of information about solar energy, home energy and electricity in books or internet. The solar radiation can easily be measured using a homemade solar radiation meter that you can make at home.
In order to get optimum use out of the solar radiation, the home solar water heating system has to be set up in an open area. Next, you have to determine where you want to locate your DIY solar water heater for home. The ideal location is towards the south because this direction absorbs more solar radiation. After determining the best location for your home solar water heater, you can now choose the size of the solar radiation collector plate that you will use.
There are two types of solar water heater that you can make at home. One of these is an open top water heater while the other is an evacuated tube system. The latter is considered to be better than the former because the open top system does not require any insulation and the solar flux is able to flow freely through the tubes. For the purpose of heating the entire 100 liter tank, an ordinary galvanized steel water heater plate is used. It must be noted though that the size of the plate and the size of the tank are dependent on the size of the solar collector. You can either purchase or make one of these two systems at home.
The closed top system is more effective in terms of transferring solar energy into heat. However, it uses larger and expensive copper piping. In order to heat water with the help of solar water heater, solar collectors are connected to individual photovoltaic cells. When the sun shines on these cells, electrons are knocked loose. These electrons then produce an electric current which is then transferred to the water tank by way of a copper pipe.
Home solar water heating systems are efficient systems that can save you money. If your local utility company charges you much for your hot water energy, then you may opt for using this solar energy to meet your needs. Not only will you be saving money, but you will also contribute your share to save the environment. Solar power is the future of green energy. Once this technology becomes widely adopted all over the world, there will no longer be any need to burn fossil fuels. We will only be producing our own energy through solar energy.